Posted in

What is the typical draft angle for aluminum die casting?

If you’ve ever held a die-cast aluminum part—say, a car engine mount, a consumer electronics housing, or a power tool casing—you might have noticed it slides effortlessly off the mold after it solidifies. That’s not a happy accident; it’s the work of a small but critical design detail called draft angle, and for us as a die casting supplier, it’s one of the first things we walk new customers through when they send a part drawing for quote. I get dozens of emails every week from engineers and product designers, and one question I still hear more often than any other (after “how much will this cost?”) is: “What’s the right draft angle for aluminum die casting?” It’s a simple question, but the answer isn’t one-size-fits-all. Let me break down what we’ve learned over 15 years of casting aluminum for industries ranging from automotive to medical, and why getting this angle right can make or break a part’s quality, lead time, and bottom line. Die Casting

First, let’s get on the same page about what draft angle actually is. When we talk about die casting, we’re working with two hardened steel halves of a mold—the core and the cavity. After molten aluminum is injected at high pressure, it cools and shrinks as it solidifies. That shrinkage is key: aluminum shrinks roughly 1.5% as it goes from liquid to solid, which means it will clamp tightly around the core of the mold if there’s no slope to the part’s walls. Draft angle is that tiny slope, measured in degrees, carved into every inner surface of a part that meets a mold core, and every outer surface that meets the mold cavity. Think of it like a children’s slide: steep enough to let something slide down easily, but not so steep that it warps the shape you need.

Now, the typical draft angle for aluminum die casting is not a random number we pull out of a notebook. It depends on three big factors: the type of aluminum alloy you’re using, the depth of the feature you’re casting, and whether that feature is a simple straight wall or has complex details like threads, holes, or ribs. For most general-purpose aluminum alloys like A380, which is the workhorse of the die casting industry, the standard baseline we use is 0.5 degrees for small, shallow features and 1 degree for deeper, taller walls. Wait, you might be thinking—why can’t we just use 0.5 degrees for everything? Let’s talk about why depth changes that.

If you’re casting a part with a wall that’s just 10mm deep, 0.5 degrees of draft is almost unnoticeable to the eye, and the part will slide off the core with zero issues. But if that same wall is 100mm deep, 0.5 degrees of draft works out to a total taper of just 0.87mm across that height. That’s barely enough to overcome aluminum’s shrinkage, and we run a very high risk of the part sticking to the core. Sticking parts are a nightmare for die casters: when a part doesn’t eject cleanly, you’re looking at broken molds, damaged parts, and hours of downtime to pull a stuck core out of a machine. We once had a customer send us a drawing for a 120mm tall heat sink with only 0.3 degrees of draft; their manufacturer had used that number to “save space” on the part’s footprint, and when we ran the first trial, 12 out of 24 parts stuck so badly we had to machine them by hand. That cost us 2 days of production time, and we learned a hard lesson: for features deeper than 50mm, bump that draft angle up by 0.5 degrees, minimum.

Alloys matter too, and this is where we see a lot of customer mistakes. A380 is soft, shrinks consistently, and has a low coefficient of friction against steel molds. But what about harder, higher-strength alloys like A413 or A383? These alloys have less shrinkage than A380, but they’re also more abrasive—their silicon content creates tiny hard particles that can scratch the mold walls and make the part stick even if the draft angle is correct. For A413, we bump the standard draft angle up 0.25 degrees across the board; for high-silicon alloys used in engine components, we go even higher. We also have customers working with heat-resistant alloys for aerospace, which can require 1.5 to 2 degrees of draft because their shrinkage is less predictable and they’re prone to warping if the angle is too small.

Then there are the tricky features that throw the baseline numbers out the window. Threads, for example, are one of the most common features that make engineers reach for smaller draft angles, and that’s a mistake. Internal threads have deep, fine pitch lines that wrap around the core, so if your draft angle is too small, the part will lock onto the thread core like a screw. For internal threads up to M10, we use a minimum of 1 degree of draft on the thread walls; for larger M20 threads, we go to 1.5 degrees. External threads, which are cast on the outside of a part, have their own rules: if the thread is going to be tapped after casting, we can get away with 0.5 degrees, but if it’s a permanent cast thread that won’t be tapped, we need 1 degree to ensure it unscrews cleanly from the mold’s threaded cores. Ribs and gussets, which are the thin support structures inside most die cast parts, also need extra draft. A rib that’s 10mm tall and 2mm thick is easy, but a rib that’s 50mm tall? Add 0.25 degrees to the standard for the wall. We once had a customer with a power tool housing that had 30mm tall ribs; they specified 0.5 degrees, and when we ran the trial, every rib bent during ejection because the draft was too small to let the rib flex slightly when the core pulled away. That’s a common issue—parts aren’t rigid, so draft angle needs to account for the part’s ability to move slightly during ejection.

Now, let’s talk about when you can go smaller than the standard. Every engineer wants to minimize draft, right? Smaller draft means closer tolerances, less material wasted, and a part that fits together better. But there are very narrow limits here. For shallow features—say, a 5mm tall boss that’s only used to mount a small screw—we’ve gotten away with 0.25 degrees of draft, and even 0 degrees in rare cases, but only if the part is made from A380, and only if we use a lubricant during ejection. But let me be clear: going below 0.5 degrees almost always comes with a tradeoff. If you cut draft too small, you’re looking at either increased scrap rate (parts stuck in molds), longer cycle times (we have to slow down the ejection process to avoid breaking parts), or mold damage (prying stuck parts out wears down the core over time). We recently quoted a part for a medical device customer who wanted 0 degrees of draft on their 8mm tall bosses; when we ran the numbers, the scrap rate would have been 18%, which would have made the part 22% more expensive than if we used 0.5 degrees. We explained that to them, and they adjusted the drawing immediately—saving themselves thousands in production costs.

What about when you need more draft? There are cases where even 1 degree isn’t enough. Deep pockets, undercuts, or parts with complex geometries that require the mold to split in multiple directions. For parts with features deeper than 150mm, we recommend 1.5 to 2 degrees, and in some cases, we use tapered cores instead of straight tapered walls to make ejection even smoother. We also work with customers who have parts that will be anodized or powder coated; those finishes can add 0.02 to 0.05mm of thickness to the part’s surface, which means you need to account for that extra layer in your draft. If your part has 0.5 degrees of draft, a 0.05mm finish thickness might push it just enough to cause sticking when the part is coated. We adjust the draft by 0.1 degrees for coated parts, which is a small change but makes a huge difference in final assembly.

A common myth we hear all the time is that draft angle only applies to the inner surfaces of a part. That’s not true—outer surfaces that meet the mold cavity need draft too, but they’re a bit less critical because aluminum shrinks away from the cavity, not towards it. For outer walls, we can use slightly smaller draft angles, usually 0.25 to 0.5 degrees, as long as the part doesn’t have any features that catch on the mold. For example, a flat outer surface with no holes or bumps can have 0.25 degrees, but if the outer wall has a protruding lip, that lip needs enough draft to slide past the mold’s cavity without catching.

Over the years, we’ve built a simple checklist to help customers figure out their ideal draft angle, and I share this with everyone who sends us a drawing. First, note the maximum depth of any feature in your part. If it’s less than 50mm, start with 0.5 degrees. If it’s 50 to 100mm, start with 1 degree. If it’s over 100mm, start with 1.5 degrees. Then, check your alloy: if you’re using A380, you can stick to that baseline, but for A413, add 0.25 degrees, and for high-silicon alloys, add 0.5 degrees. Finally, check for tricky features: threads, ribs, undercuts, or coated surfaces, add 0.25 to 0.5 degrees extra as needed.

Let me wrap this up with a real example from our shop. Last quarter, we cast 5,000 parts for a leading electric vehicle startup: a battery tray bracket made from A380 aluminum, with 120mm tall mounting walls and 25mm tall internal ribs. The customer’s initial drawing called for 0.5 degrees of draft on all features. We ran a trial run of 50 parts, and 8 of them stuck to the core during ejection—scrap rate of 16%, which was way above our standard 2% for that type of part. We called the customer, explained that their 0.5 degrees was too small for 120mm tall walls, and proposed adjusting the draft to 1 degree on the main walls and 0.75 degrees on the ribs. We ran another trial, and this time only 1 part stuck—scrap rate under 2%, and the parts fit perfectly into their battery assembly a month later. The customer saved $12,000 in scrap costs over the first 1,000 parts we cast for them, just by adjusting that small detail.

At the end of the day, draft angle is one of those details that engineers often overlook in the design phase, but it’s central to the cost and quality of a die cast part. Too small, and you’re looking at high scrap, mold damage, and delivery delays. Too big, and you’re wasting material, adding unnecessary weight to the part, or making it harder to assemble. The typical draft angle for aluminum die casting is a starting point, but it’s not a rule set in stone. It’s a balance between your part’s design, the alloy you’re using, and your production goals.

If you’re working on a new aluminum die cast part and you’re not sure about your draft angles, or you want to avoid the mistakes that have cost our customers thousands over the years, we can help. We offer free design reviews for any part you’re considering, no obligation. Just send over your drawing, and our engineering team will walk you through the adjustments that will make your part cast smoothly, cost less, and deliver the quality you need.

Extrusion References

  1. Die Casting Engineering Association. (2022). Design Guidelines for Aluminum Die Casting. North American Die Casting Association.
  2. Miller, G. (2021). “Draft Angle Selection for High-Volume Aluminum Die Cast Parts.” Journal of Die Casting Manufacturing Technology, Vol. 45, No. 2, pp. 18-24.
  3. Smith, L. (2020). Alloy Properties and Process Variables in Aluminum Die Casting. Society of Manufacturing Engineers.

Taiwan Hardware Corp.
Taiwan Hardware Corp. is one of the most experienced die casting manufacturers and suppliers in Taiwan, featured by quality products and good service. Please feel free to buy ISO certified die casting from our factory. For customized service and OEM service, contact us now.
Address: 7th Floor, No.270, Section 1, Fuxing Road, South District, Taichung City
E-mail: silviatsai@panutw.com
WebSite: https://www.taiwanhardware-en.com/