Hey everyone, and welcome back to the blog! As someone who’s been deep in the pontoon boat game for years—helping people find the right craft for weekends on the lake, fishing trips with the crew, or just cruising around with a cooler of soda—one question I get all the time is about fuel efficiency. Folks don’t want to drop a ton of cash on gas every time they hit the water, right? I totally get that, so let’s break this down like we’re sitting on a dock with a cold beer, no fancy jargon, just real talk about what makes pontoons guzzle (or not) gas. Pontoon Boats

First off, let’s get one thing straight: pontoon boats aren’t speed machines. That’s not their whole vibe—they’re built for smooth rides, space for friends, and chilling, not zipping across the water like a speed racer. But that also means their fuel efficiency is way different from, say, a fiberglass bowrider or a ski boat. Let’s start with the basics. Pontoons use two (or sometimes three) aluminum tubes under the deck, which are super stable but add a bit of drag compared to a single fiberglass hull. And how you drive ‘em changes everything—like, if you mash the gas every time you head out, you’re gonna use way more fuel than if you cruise at a steady, moderate speed.
So, what’s the actual number we’re talking about? Let’s keep it relatable, not just a random stat. Most standard pontoons (the ones with a 115 to 150 horsepower outboard motor—super common for casual use) get around 4 to 6 miles per gallon when they’re cruising at 15 to 20 miles per hour. Wait, but hold on—if you lean into that speed a little, like 25 to 30 mph, that drops to 2 to 4 mpg. And if you’re just idling around the cove at 5 mph? That’s like 15 to 20 gallons per hour, which sounds bad but makes sense because you’re not moving anywhere, just running the motor to stay on the water.
But here’s the catch: that’s the average, and there’s a ton of factors that swing that number. Let’s talk about size first. A tiny 16-foot pontoon (perfect for two people and a small fishing gear load) is way more efficient than a 24-foot pontoon with a full deck, a slide, a sound system, and 8 people on board. The bigger the boat, the more weight it’s carrying, and the more power it needs to push through the water. I had a customer last summer who got a 18-foot pontoon with a 90 hp motor—he told me he was getting almost 7 mpg cruising, and another guy with a 22-foot tri-toon (three tubes, for extra stability) and a 150 hp motor was at 3.5 mpg. That’s a huge difference, and it’s all about size and how much they’re hauling.
Then there’s the motor itself. A lot of modern pontoons are switching to four-stroke outboards now, which are way more fuel-efficient than the old two-stroke models. Back in the day, two-strokes burned more oil and gas, but four-strokes deliver better torque at lower speeds, so you’re not wasting fuel revving high to go the same speed. I always recommend sticking to a four-stroke if efficiency is your top concern—our customers who make that call save like 15% to 20% on gas every time they head out. Also, electric pontoons are popping up more now, especially for people who boat in areas with strict emissions rules. They’re super efficient if you have a short route—like 5 to 10 miles of cruising—no gas at all, just charging. But they’re not great for long trips or towing tubes, since their range is limited. That said, if you’re just a casual lake user, electric could be a game-changer for your wallet.
Environmental factors play a big role too, and this is something a lot of first-time pontoon owners don’t think about. If you’re boating on a choppy lake with a strong headwind, that’s way more drag, so you use way more gas. Calm, flat water? You’re golden, efficiency goes up. Water temperature matters too—colder water can make the motor work a little harder, so you might see a 5 to 10% drop in efficiency in the middle of winter (if you’re boating in cold climates, that is). And weight, we mentioned it, but it’s worth hammering home: a full tank of gas, a cooler of food, a group of friends, and a whole bunch of fishing gear? That adds up. If you’re cruising light, you’ll get way better numbers than if you’re packed to the gills. Let’s do a quick real example: I had a family of four bring their two dogs, a full ice chest, fishing rods, and a kayak tied to the back on a 22-foot pontoon. They were going 20 mph and got 3 mpg. The next weekend, they went just the two parents, no extra gear, same boat, same speed—they hit 5 mpg. That’s a massive difference, and it’s all about what you’re hauling.
Another thing people often mix up: mpg vs. gallons per hour. If you’re trying to budget for a day on the water, gallons per hour is way more useful. Because if you’re cruising at a steady 20 mph, you can calculate how many hours you’ll be out and multiply by the gph rate. For that same 115 hp four-stroke, at 20 mph, it’s about 5 gallons per hour. So if you’re out for 6 hours, that’s 30 gallons, which is around $100-$120 depending on gas prices—way easier to plan for than guessing mpg. If you’re running at wide-open throttle (WOT), that’s more like 15 to 20 gph, but who’s doing that all day? No one—you’re wasting gas and risking damage to the motor, too.
Now, let’s talk about how to actually improve your pontoon’s fuel efficiency, because that’s what most people care about. First, keep those pontoon tubes clean. Algae, barnacles, and gunk building up on the bottom add drag like crazy. I tell all our customers to pressure wash the tubes at the start of every season, and if you boat in saltwater, do it more often—salt causes way more buildup. Second, stay within the optimal speed range. For most pontoons, that sweet spot is 15 to 25 mph—go faster, and you’re burning way more gas to push that extra speed; go slower, and the motor isn’t running at its most efficient RPM (you’ll see those gph numbers climb). Third, don’t overload the boat. It’s not just about safety (the Coast Guard has weight limits, remember?)—it’s about saving gas. If you don’t need all that extra gear, leave it at home. And finally, maintain your motor regularly. Change the oil, replace the spark plugs, get the fuel filter checked—stuff like that keeps the motor running smoothly, so it doesn’t burn more gas than it needs to. We do all the prep for motors when we sell them, but it’s up to owners to keep up with maintenance year after year.
Wait, but let’s be real—pontoons aren’t the most fuel-efficient boat on the market. If you’re comparing to a small ski boat, which might get 8 to 10 mpg at cruise, yeah, pontoons are lower. But you’re not getting the same space, stability, or comfort. A pontoon with 10 people on board is way more practical than a ski boat with 4, so the tradeoff makes sense for most people. Also, newer models are way better than old ones. Ten years ago, a 24-foot pontoon with a 150 hp motor might get 2.5 to 3 mpg, now with better hull design and four-stroke motors, that’s up to 3.5 to 4 mpg. Manufacturers are always tweaking things to cut down on drag, whether it’s designing sleeker tubes or adding features that reduce water resistance.
I should also mention tri-toons vs. standard pontoons, since those are super popular now. Tri-toons have three tubes instead of two, which makes them way faster—they can hit 40+ mph if you want—but their fuel efficiency is a bit lower. A tri-toon with a 150 hp motor might get 2.5 to 3.5 mpg at cruise, compared to 3.5 to 5 mpg for a standard two-tube pontoon. Again, that’s because the third tube adds a bit more drag, but most people who buy tri-toons aren’t as worried about gas—they want speed and stability. That’s just how it goes: more performance often means a little less efficiency, but it’s a tradeoff for what you need.
Let’s wrap this up with some actionable takeaways, because that’s what you came for, right? If you’re in the market for a pontoon and efficiency is your top priority: go for a smaller to mid-sized two-tube model (18 to 22 feet), a four-stroke outboard (90 to 115 hp is enough for casual cruising), and electric might be a great add-on if you’re only boating short distances. Once you own it: cruise at 15 to 25 mph, keep the tubes clean, don’t overload, and stay on top of motor maintenance.

At the end of the day, fuel efficiency for pontoons isn’t a one-size-fits-all number. It depends on size, motor, speed, weight, water conditions, and how you use the boat. I’ve seen customers go from hating their gas bills to saving hundreds a year just by adjusting their driving and keeping the boat maintained. If you’re trying to figure out which pontoon makes the most sense for your budget and your lake days, hit me up—we can chat about your needs, break down efficiency for specific models, and get you set up with something that works for you. No pushy sales stuff, just real advice from someone who’s been in this game for years. And if you already own a pontoon and have your own fuel-saving tips, drop ‘em in the comments below—I’d love to hear ‘em!
Landing Craft References:
- National Marine Manufacturers Association. (2022). Pontoon Boat Fuel Efficiency and Performance Report.
- U.S. Coast Guard. (2023). Recreational Boat Weight and Load Guidelines.
- Marine Engine Manufacturers Association. (2021). Four-Stroke Outboard Fuel Economy Analysis.
- Lake and Reservoir Management Association. (2022). Effects of Hull Fouling on Boat Fuel Efficiency.
Longkou Jinda Shipping Co., Ltd.
With abundant experience, we are one of the most professional pontoon boats manufacturers and suppliers in China. Please feel free to buy high quality pontoon boats made in China here from our factory. We also accept customized orders.
Address: North of Shuangyu Village, Xingjia Sub-district, Longkou City, Yantai City, Shandong Province
E-mail: Leo99999@qq.com
WebSite: https://www.jindaship.com/