{"id":3517,"date":"2026-09-29T00:50:01","date_gmt":"2026-09-28T16:50:01","guid":{"rendered":"http:\/\/www.asnikan.com\/blog\/?p=3517"},"modified":"2026-09-29T00:50:01","modified_gmt":"2026-09-28T16:50:01","slug":"are-there-any-ppe-for-food-processing-in-areas-with-high-pressure-cleaning-4d2c-9457d0","status":"publish","type":"post","link":"http:\/\/www.asnikan.com\/blog\/2026\/09\/29\/are-there-any-ppe-for-food-processing-in-areas-with-high-pressure-cleaning-4d2c-9457d0\/","title":{"rendered":"Are there any PPE for food processing in areas with high – pressure cleaning?"},"content":{"rendered":"

If you\u2019ve ever walked through a food processing plant, you\u2019ve definitely heard that high-pitched, high-pressure spray before \u2014 it\u2019s how teams deep-clean equipment, conveyor belts, and floor surfaces at the end of every shift, right? I\u2019m the owner of a small, specialized food processing PPE supplier, and I can\u2019t tell you how many times I\u2019ve had plant managers stop me mid-pitch and go, \u201cWait, so there\u2019s actual PPE for people doing that high-pressure cleaning?\u201d Like, yeah \u2014 most people assume you just throw on a raincoat and a pair of old boots and call it a day. But after 8 years in this game, I\u2019m here to tell you that\u2019s a huge mistake. That high-pressure spray isn\u2019t just water under pressure \u2014 it\u2019s a hazard that can cause serious, even permanent injuries, and a lot of the gear out there is totally unfit for the job. Food Processing PPE<\/a><\/p>\n

<\/p>\n

First, let\u2019s get real about the risks, because anyone working in or managing a food processing plant needs to care about this. High-pressure cleaning (we call it HPC around here, saves so much time) typically runs at 1,000 to 5,000 PSI. Some heavy-duty units for industrial ovens or large mixing tanks can hit 10,000 PSI \u2014 that\u2019s more pressure than a firefighter\u2019s hose, for context. If that spray hits your skin, it doesn\u2019t just \u201cfeel like a sting\u201d \u2014 at lower PSI, it can break the skin and push water, chemical cleaners, or even food waste deep into tissue. At higher PSI, it can actually cut through leather gloves like butter, or go through thin fabric and cause organ damage if it hits your torso. And if you\u2019ve got chemical cleaners mixed in (like chlorine, lye, or sanitizers used to kill bacteria like E. coli or salmonella), that water isn\u2019t just gross \u2014 it\u2019s corrosive and can cause chemical burns that are way worse than regular scrapes. I once heard from a plant supervisor in Ohio who had a guy get water in his ear during an HPC shift; it ruptured his eardrum, he missed 6 weeks of work, and the plant had to cover his medical bills because they didn\u2019t have the right PPE for him. That\u2019s the stuff that keeps me up at night.<\/p>\n

Now, let\u2019s talk about the actual PPE that works for this \u2014 not the random stuff you grab from a janitorial closet. First, the big one: protective gloves. Regular work gloves? Useless here. I\u2019ve tested cheap rubber gloves, the ones that fit in a box by the sink \u2014 if you hold a high-pressure wand against them for 10 seconds, they leak. What you need are specialty HPC gloves, usually made of a thick, puncture-resistant material like nitrile or butyl rubber, often with a reinforced nylon or aramid (like Kevlar) lining. A lot of people ask if latex works, and no \u2014 latex tears too easily. These gloves have to cover the wrist, too, not just stop at the palm; spray can slip between a short glove and your sleeve, and that\u2019s where the worst wrist injuries happen. I had a new hire at my supplier test a pair of entry-level HPC gloves last year \u2014 he blasted them with a 2,000 PSI spray for 30 seconds, and not a drop got through. That\u2019s the kind of test we do in-house, no shortcuts.<\/p>\n

Next, body protection. Raincoats and disposable coveralls are terrible for HPC. Why? First, they\u2019re usually water-resistant, not waterproof \u2014 over the course of an 8-hour shift, water seeps in, and you\u2019re soaked, which leads to cold stress (even in warm plants, standing in wet clothes all day makes your core temp drop) and skin irritation. Second, regular rain gear isn\u2019t chemical-resistant. If you\u2019re using a caustic cleaner to bake-on gunk off a conveyor, that raincoat will absorb the chemical and sit against your skin. HPC coveralls, though? They\u2019re made with a heavy-duty, membrane-lined fabric that\u2019s both waterproof and chemical-resistant. A lot of them have sealed seams too \u2014 no gaps where spray can seep in at the shoulders or waist. I know some plant teams like to go for full-body suits, like the ones mechanics wear, but we find the coveralls are more flexible for moving around machinery, and most people prefer them over being totally enclosed. One tip I always give: get coveralls with a higher neck, not a v-neck. I\u2019ve seen too many neck burns from spray that hits the shirt collar and slips down inside.<\/p>\n

Then there\u2019s eye and face protection \u2014 this is non-negotiable, no exceptions. The high-pressure spray can kick up tiny debris, food particles, chemical mist, and even bits of metal from old conveyor parts if they wear down. If that hits your eye, it\u2019s a trip to the ER, no question. Regular safety goggles? Wait, no \u2014 not even the ones you wear for grinding metal. HPC goggles or face shields have to be rated for high-pressure impact, and a lot of them are chemical-resistant too. Some of the better ones have a visor that covers the whole face, not just the eyes, and side guards so spray doesn\u2019t come in from the sides. Last year we got a batch of goggles tested for a plant that sanitizes poultry processing equipment \u2014 they had to meet NSF standards, by the way, because the plant is food-grade, so no toxic chemicals in the gear that can transfer to food. Those goggles passed with flying colors; no spray got through, and they didn\u2019t fog up even when the plant was steamy. I can\u2019t stress enough how important it is to get food-grade rated gear here \u2014 if your PPE has any coatings or materials that can flake off and get into your product, you\u2019re looking at a recall, not just a worker injury. That\u2019s a double win for HPC PPE: it protects the team and protects the plant\u2019s product.<\/p>\n

Feet and legs, too \u2014 can\u2019t forget those. Regular rubber boots break down fast when exposed to HPC and chemicals. I\u2019ve had plant managers tell me they go through 2-3 pairs of boots a month for their HPC team, which is crazy expensive. What works are HPC-rated boots, usually made of chemical-resistant rubber, with a steel toe and puncture-resistant midsole (for stepping on dropped tools or sharp metal bits) and a non-slip sole, because that floor is soaked and slippery. They\u2019re higher than regular work boots, too \u2014 they come up to mid-calf, so spray doesn\u2019t get in the top of the boot and soak your socks. We recently worked with a snack food plant that was going through boots every 3 weeks because the caustic cleaner ate through the soles. We swapped them to our chemical-resistant HPC boots, and they\u2019re still going strong 5 months later. The savings there is huge \u2014 not to mention the workers aren\u2019t sliding around on wet floors and risking a fall, which is another top workplace injury in food processing.<\/p>\n

Wait, and let\u2019s not forget about the unsung hero: hearing protection. A high-pressure wand is loud \u2014 like 85 to 110 decibels, which is about the same as a lawnmower or a power saw. Over an 8-hour shift, that can cause permanent hearing loss if you\u2019re not wearing protection. A lot of HPC teams skip this because they\u2019re focused on the spray, but I always tell them: even if you can hear someone yelling to warn you of a moving conveyor, that\u2019s worth protecting. The good news is, you can get earplugs or earmuffs that are chemical-resistant and work with your other PPE \u2014 no need to buy separate gear that doesn\u2019t fit right.<\/p>\n

Now, here\u2019s the thing that a lot of PPE suppliers won\u2019t tell you: it\u2019s not just about selling gear \u2014 it\u2019s about getting the right fit and making sure your team actually wears it. I\u2019ve had plant managers tell me they bought the fancy HPC coveralls, but the workers complained they\u2019re too bulky, so they take them off mid-shift. That\u2019s a waste of money. That\u2019s why we do custom fittings for all our clients \u2014 we show up in person, measure people, figure out if they prefer coveralls over full suits, make sure the gloves fit so they can hold the wand without being awkward. We also do on-site training, too \u2014 not just \u201cput this on\u201d but \u201chere\u2019s how to adjust the neck of the coverall to seal it, here\u2019s how to check your gloves for tears before every shift, here\u2019s why you never wear those old rain boots out by the washing machine.\u201d Last year we had a produce processing plant that had 3 reported HPC-related injuries in 6 months; after we refitted their whole team with the right PPE and did a quick training session, they went 12 months without a single injury. That\u2019s the kind of impact I care about, not just sales.<\/p>\n

And for all the plant owners reading this (or whoever\u2019s in charge of keeping your team safe), let\u2019s talk about compliance. OSHA has specific rules for workplace hazards in food processing, and HPC spray is listed under \u201chigh-pressure fluids\u201d which requires PPE rated for the pressure you\u2019re working with. Also, food-grade facilities have to follow standards from the FDA and NSF, so using non-food-grade PPE that can shed contaminants is a big no-no \u2014 you could get fined, or worse, have a product recall that costs millions. We only sell gear that\u2019s NSF-approved, meets OSHA\u2019s guidelines, and is tested specifically for food processing environments, not just general industrial use. A lot of other PPE brands out there make generic HPC gear that works for construction or mechanics, but not for cleaning dairy tanks or poultry lines. That\u2019s the mistake so many plants make \u2014 they grab whatever\u2019s on Amazon or from a janitorial supply store, and it doesn\u2019t hold up.<\/p>\n

I should also mention that we don\u2019t do one-size-fits-all. A small craft bakery doing light HPC on mixing bowls doesn\u2019t need the same gear as a large beef processing plant with 10,000 PSI sprayers. We entry-level gloves for smaller operations that run 1,000-2,000 PSI, and heavy-duty gear for the big plants. We also have options for people who prefer lightweight gear for summer shifts, and heavier insulation for winter months when the plant is cold and workers are standing in wet conditions. It\u2019s all about meeting your specific needs, not forcing a single product on you.<\/p>\n

At the end of the day, this isn\u2019t just about selling PPE. I started this company after my cousin got injured in an HPC accident at a food plant \u2014 he\u2019s still got scarring on his arm, and he can\u2019t do heavy manual work anymore. That stuck with me, so everything we do is built around keeping workers safe while they do the hard, important job of keeping our food safe. If you\u2019re looking to upgrade your team\u2019s HPC PPE, or you have questions about what would work for your specific operation, I\u2019m here to help. We can do free on-site assessments, show you different gear, and help you figure out what fits your budget and your needs. No pushy sales pitches, no hidden fees, just actual PPE that works for food processing high-pressure cleaning.<\/p>\n

<\/p>\n

If you\u2019re ready to connect and talk through what your team needs, reach out to our team to start a conversation. We\u2019ll make sure you get the right gear, the right training, and the support to keep your workers safe and your plant compliant.<\/p>\n

Fall Protection<\/a> References:<\/p>\n

    \n
  1. Occupational Safety and Health Administration (OSHA). 2023. Guidelines for High-Pressure Fluid Hazard Prevention in Food Processing Facilities.<\/li>\n
  2. National Sanitation Foundation (NSF). 2022. PPE Standards for Food Industry Cleaning Equipment and Personnel.<\/li>\n
  3. Centers for Disease Control and Prevention (CDC). 2021. Work-Related Injuries from High-Pressure Cleaning in Food and Agricultural Settings.<\/li>\n
  4. Food and Drug Administration (FDA). 2020. Food Grade Personal Protective Equipment Requirements for Processing and Sanitation Teams.<\/li>\n<\/ol>\n
    \n

    Shanghai Cosystar International Trading Co., Ltd.<\/a>
    As one of the leading food processing ppe manufacturers and suppliers in China, we are specialized in providing high quality customized service for global clients. Please feel free to wholesale bulk high-grade food processing ppe for sale here from our factory. Contact us for more details.
    Address: Room 203-2, Buliding 7, No 520 Zhenda Road, Baoshan District, Shanghai, China Chicago office 1000 Jodie Blvd Suite 52 Oak Brook IL, 60523 \u2013 2212
    E-mail: Tonyl.tong@sh-cosystar.com
    WebSite:     https:\/\/www.sh-cosystar.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever walked through a food processing plant, you\u2019ve definitely heard that high-pitched, high-pressure spray … Are there any PPE for food processing in areas with high – pressure cleaning?<\/span>Read more<\/a><\/p>\n","protected":false},"author":35,"featured_media":3517,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3480],"class_list":["post-3517","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-food-processing-ppe-4bfd-949fea"],"_links":{"self":[{"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/posts\/3517","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/users\/35"}],"replies":[{"embeddable":true,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/comments?post=3517"}],"version-history":[{"count":0,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/posts\/3517\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/posts\/3517"}],"wp:attachment":[{"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/media?parent=3517"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/categories?post=3517"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.asnikan.com\/blog\/wp-json\/wp\/v2\/tags?post=3517"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}